Additional information
| Weight | 23.9 kg |
|---|---|
| Dimensions | 1150 × 1190 × 316 mm |
250L Marshal Plus with 30m Manual Hose Reel & ATV Trailer
*ONLY AVAILABLE FOR 250L MARSHAL*
Introducing the 250L Marshal ATV Trailer, with its inverted axle giving you two length options differing by 100mm. Mounted through ball coupling hitch. Only fits 250L spraying units.
VIEW PARTS BREAKDOWN VIEW SPARE PARTS
- 250L Marshal Plus unit
- High quality galvanised steel
- 50mm tow hitch
- Single axle
- 22″ high flotation tyres
- Rear boom mount
- To confirm stock or lead time contact us or visit your local dealer.
$6,561.00
Weight
23.9 kg
Dimensions
1150L x 1190W x 316H mm
SKU #PRAM0250L0120H
FAQs
What type of oil can be used in this pump?
We recommend 10w-30 for this pump, however always consult the pump manual for your unit.
Why won’t my pump prime?
Cause: The motor is idling too low, or the suction filter or hose is loose, allowing air instead of water.
Solution: Increase the engine RPM above idle to engage the clutch properly. Ensure the suction filter is securely attached to the pump.
Why is the pump losing pressure or fluctuating?
Cause: Possible air leaks, blocked intake, or filter issues.
Solution: Inspect and tighten all hose fittings and clamps. Check the intake hose for kinks or blockages. Ensure the filter cap is properly engaged and the gasket is intact.
Why is the pump motor cutting out under load?
Cause: The engine may be underpowered or the clutch isn't fully engaging.
Solution: Increase engine RPM to ensure the clutch engages fully.
Why does the pump not start?
Cause: The engine may not be engaging correctly with the pump.
Solution: Ensure the motor RPM is above idle to allow the clutch to engage properly.
Why is the pump making unusual noises?
Cause: Loose or missing screws, or debris in the pump.
Solution: Regularly check and tighten all screws. Ensure no parts are missing and that the pump is free from debris.
